工程科技文献索引服务平台 | abstract.cmanuf.com

Correction of flow stress and determination of constitutive constants for hot working of API X100 pipeline steel

刊名：	International Journal of Pressure Vessels and Piping
作者：	Qian, Ling-Yun（Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China） Fang, Gang（Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China） Zeng, Pan（Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China） Wang, Li-Xiao（Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China）
刊号：	712C0008
ISSN：	0308-0161
出版年：	2015
年卷期：	2015, vol.132/133
页码：	43-51
总页数：	9
分类号：	TK2
关键词：	X100 pipeline steel；Hot working；Constitutive constant；Stress correction；Flow stress
参考中译：
语种：	eng
文摘：	Uniaxial compression tests of X100 pipeline steel were conducted to investigate its hot working behavior. Cylindrical specimens were compressed over a wide strain rate range of 0.001-50 s(-1) and a temperature range of 850-1100 degrees C. Due to the heat generated from deformation and friction, the measured temperatures of compressed specimens at higher strain rates (>= 1 s(-1)) deviated from the preset temperatures. Therefore, their measured stresses were corrected to obtain the true stresses at the pre-set temperatures before they were used for calculating constitutive equations. The Arrhenius-type constitutive equation was selected to describe the hot working behavior on the basis of corrected stresses. Strain-dependent constitutive constants were determined. The constitutive equation and corrected stress-strain data were both verified by using the results of additional tests at a strain rate of 20 s(-1). (C) 2015 Elsevier Ltd. All rights reserved.