首页
文献服务
文献资源
外文期刊
外文会议
中文期刊
专业机构
智能制造
高级检索
版权声明
使用帮助
Field evaluation of a newly registered metalworking fluid biocide
     
  
  
刊名:
Lubrication Engineering.
作者:
Frederick J. Passman
Jim Summerfeld
Jeffery Sweeney
刊号:
780B0005
ISSN:
0024-7154
出版年:
2000
年卷期:
2000, vol.56, no.8
页码:
26-32
总页数:
7
分类号:
TH
关键词:
Additives
;
Biocides
;
Metalworking fluids
参考中译:
语种:
eng
文摘:
Although 2.2-dibmmo-3-nitrilopropionamide (DBNPA) has been used for nearly 25 years to treat cooling tower and other low organic-load, industrial process fluids, the U.S. EPA did not approve its use in metalworking fluids until late 1976. Because of its short half-life at pH> 8.0, the traditional DBNPA product [20% active ingredient (a. i.) aqueous solution] has limited usefulness in metalworking fluids. DBNPA in a 40-percent a. i., time-release tablet (DBNPA-TR) was approved for use in December 1996. Preliminary laboratory trials indicated that DBNPA-TR tablets provide two to four weeks, broad-spectrum antimicrobial activity. This paper presents data from field evaluations performed at three facilities by three major coolant formulators. DBNPA-TR was used at a treat rate of one 0.44 lb (200 g) tablet per 50 gal (189L). Each field evaluation compared DBNPA-TR performance in at least three similar sumps with that of the site's traditional microbial control program in three additional sumps. DBNPA-TR's performance in a variety of metalworking fluids and operations provides a clear profile of the product's performance benefits and limitations.
相关文献:
POROSITY EFFECTS IN LOW PROFILE ADDITIVES (LPA) BASED POLYESTERS
SENSITIVITY OF ENGINE-COMPONENT WEAR TO LUBRICANT-ADDITIVE AND CONTACT CONDITIONS USING AN ANTIWEAR FILM FORMATION MODEL
Lubrication of TiN, CrN and DLC PVD Coatings with 1-Butyl-1-Methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate
Alkyl Imidazolium Ionic Liquids as Friction Reduction and Anti-Wear Additive in Polyurea Grease for Steel/Steel Contacts
Use of ultrasonic consolidation for fabrication of multi-material structures
Lubricant additives effects on the hydrodynamic lubrication of misaligned conical-cylindrical bearings
Pulse plating of nickel: influence of electrochemical parameters and composition of electrolyte
Reformer Gas Composition Effect on HCCI Combustion of n-Heptane, Iso-Octane, and Natural Gas
The Influence of Synthetic Oxygenates on Euro IV Diesel Passenger Car Exhaust Emissions
Simulation of Performance of Direct Injection Diesel Engine Fuelled With Oxygenate-Blended Diesel
©2016机械工业出版社(机械工业信息研究院) 京ICP备05055788号-35