Study of a permanent mold coating for magnesium alloy


          

刊名：Giessereiforschung
作者：Yingxin Wang
Liang Zhang
Liming Peng
Wenjiang Ding
刊号：772E0001-B
ISSN：0046-5933
出版年：2010
年卷期：2010, vol.62, no.4
页码：20-31
总页数：12
分类号：TG21
语种：eng
文摘：A permanent mold coating for magnesium alloys has been investigated. The results show that the optimum composition of suspending agent (4 wt% sodium bentonite, 0.2 wt% carboxymethyl cellulose (CMC) and 0.3 wt% polyacrylamide) makes a suspending rate of 100% by orthogonal experiment. Phosphate binder has better binding strength and antidesquamation property than silicasol binder. The fused magnesia powder with a compact microstructure has better binding strength and a lower requirement of phosphate binder than the light magnesia powder with a porous microstructure. The binding strength will be decreased obviously when inhibitor addition exceeds 6 wt%. Relationship between shearing stress and shearing rate can be described as: τ~(1.093) = 14.124~(1.093) + 0.186~(1.093)γ~(1.093) and apparent viscosity vs. shearing rate, η~(0.17347) = (7.2342/γ)~(0.17347) + 0.00009~(0.17347) using the Modified Casson model. Casson yield stress can be used to characterize the suspendability of the coating and for a suspending rate of 100%, critical Casson yield stress is 14 Pa. Phosphate binder and inhibitor have no effect on the suspendability and Casson yield stress. Thermal conductivity vs. temperature shows linear relation and can be indicated as: λ = -0.00497 + 7.91805 E-4 T (100 to 200℃), λ = 0.15928 - 2.02116 E-4 T (200 to 450℃), λ = 0.07475 + 1.79218 E-4 T (450 to 600℃).



©2016机械工业出版社（机械工业信息研究院） 京ICP备05055788号-35