首页
文献服务
文献资源
外文期刊
外文会议
中文期刊
专业机构
智能制造
高级检索
版权声明
使用帮助
A Feasibility Study for Reducing Common-Mode Current on the Wire Harness Connected to Electronic Control Units
     
  
  
刊名:
Electronics and Communications in Japan
作者:
Yuichi Mabuchi
Atsushi Nakamura
Tohru Hayashi
Koji Ichikawa
Takanori Uno
Hiroshi Mizuno
刊号:
734B0084-2
ISSN:
8756-663X
出版年:
2007
年卷期:
2007, vol.90, no.9
页码:
19-31
总页数:
13
分类号:
TN0
关键词:
EMI
;
EMC
;
Common-mode current
;
Microcontroller
;
Interference electromagnetic wave radiation
参考中译:
语种:
eng
文摘:
With the recent progress in high-speed and high-density implementation, EMI (electromagnetic interference) by the electronic equipment in operation with other equipment by electromagnetic wave emission is a problem. In vehicular electronic equipment, the radio frequency (~100 MHz) is a particular problem, and the common-mode current flowing in the wire harness connected to the electronic control unit is considered to be a major factor in radiating interference electromagnetic waves. This study investigates the common-mode current of electronic control units as a major source of EMI. A double-layer printed board, which forms the mainstream of vehicular electronic control units, is assumed, and the mechanism of the problem and effective means of combating it are investigated. It is found that, for the odd harmonic frequencies of microcontroller operation, the common-mode current due to voltage fluctuation is the dominant factor, and for the even harmonic frequencies, the common-mode current due to current fluctuation is the dominant factor. In particular, for the common-mode current produced by current fluctuation, analysis shows that the generation of the common-mode current can be reduced by adequately balancing the parasitic inductances and capacitances of the wiring patterns on the printed circuit board. The results of analysis are verified by measurements using an evaluation board.
相关文献:
DESIGN AND SELECTION OF POLYMER COMPOSITES AND JOINT CONFIGURATION FOR ENHANCEMENT OF EMI SHIELDING IN ELECTRONIC PACKAGING
Innovative Technique of Shielding for RF Applications at Package Level
Integrated EMI Shield for RF Modules: Packaging Technology, Simulation and Characterization
A NEW BANDPASS SHIELDING ENCLOSURE OF HEXAGON ARRAY FOR MODERN PORTABLE DIGITAL DEVICES
LSI and PCB Unified Noise Analysis CAD System
A Passive EMI Filter with Access to the Ungrounded Motor Neutral Line: Direct Connection of a General-Purpose Inverter to a Three-Phase Grounded Voltage Source
A Globalized Trend Towards EMC Technology
A Technical Trend Seen in the Latest International EMC Symposia
Automated short circuit testing
MATERIALS BASED ON CEMENT, POLYMER AND CARBON FOR ELECTROMAGNETIC FUNCTIONS
©2016机械工业出版社(机械工业信息研究院) 京ICP备05055788号-35